When ripple fired they are used to engage personnel both exposed and sheltered and lightly armoured materiel. The data for a new 3B30 anti-armour/anti-personnel submunition are specified in brackets. In figure it is shown a rocket carrying the 3B30 anti-armour/anti-personnel submunitions. Originally there was no an element in a warhead designated by a black rectangular. This element was used to provide better ejection and dispersion of submunitions. Works were completed in 2004. The rocket is designed to use from the Smerch multiple launch rocket system.

SPECIFICATIONS

  • Caliber – 300 mm
  • Weight – 815 kg
  • Length – 7,600 mm
  • Weight of warhead – 243 kg
  • Length of warhead – 2,049 mm
  • Number of anti-armour/anti-personnel submunitions – 616 (588)
  • Weight of anti-armour/anti-personnel submunition – 0.24 kg
  • Diameter of anti-armour/anti-personnel submunition – 43 mm
  • Length of anti-armour/anti-personnel submunition – 118 (128) mm
  • Weight of explosive in anti-armour/anti-personnel submunition – 0.035 (0.046) kg
  • Thickness of homogeneous armour penetration – 120 (160) mm
  • Time to self-destruction of anti-armour/anti-personnel submunition – 130-260 (200) s
  • Range of fire:
    • maximum – 90 km
    • minimum – 25 km
  • Weight of container with two rockets – 1,964 kg (data for the 3B30 anti-armour/anti-personnel submunition are given in brackets)
Sources: 
  1. Паспорт экспортного облика №6148/04/НЭК. 300-мм реактивный снаряд 9М531 с головной частью с ку-мулятивно-осколочными боевыми элементами. Утверждён 30.09.2004 г. Копия.
  2. Рекламный паспорт №6149/04/НЭК. 300-мм реактивный снаряд 9М531 с головной частью с кумулятивно-осколочными боевыми элементами. Утверждён 30.09.2004 г. Копия.
  3. Данные, дополненные по результатам прохождения экспертной оценки материалов на ФГУП “ГНПП “Сплав” (ныне АО “НПО “СПЛАВ” (Россия, г.Тула).   
  4. Макаровец Н.А., Устинов Л.А., Авотынь Б.А. Реактивные системы залпового огня и их эффективность. Тула: Изд-во ТулГУ, 2005. – С. 45, 58.
  5. Сплав науки, опыта, инноваций // Оборонно-промышленный комплекс. ОПК РФ. – №01-02 (06-07), май 2017. – С. 107.
  6. Рисунок реактивного снаряда получен на ФГУП “ГНПП “Сплав” (ныне АО “НПО “СПЛАВ” имени А. Н. Ганичева (Россия, г. Тула). Доработка головной части рисунка: Гуров С.В. (Россия, г. Тула).